Switch công nghiệp quản lý 2 cổng quang + 24 cổng Ethernet Maiwe MISCOM6026-2F
MISCOM6026-2F series is a layer 2 100M managed rack mount industrial Ethernet switch. It supports 2×100Base-FX ports (multi/single-mode, SC/FC/ST connector), 24×10/100Base-T(X) ports, utilizing a store-and-forward mechanism. With its robust bandwidth processing capability and automatic error packet detection, it reduces transmission faults, making it suitable for Gigabit networking, ensuring stable, reliable, and efficient data transmission.
The product features industrial-grade components, high-standard system design, and production control. It's designed to fit standard 19-inch 1U rack installation, featuring a high-strength metal enclosure that is durable and fanless for heat dissipation. It can operate in a wide temperature range from -40°C to +75°C, with high-standard industrial protection design, making it adaptable to various harsh working environments, ensuring stable communication performance.
MISCOM6026-2F series support various network protocols and features including WEB management, MW-Ring v1/v2, ERPS, STP/RSTP, VLAN, LACP, LLDP, SNMPv1/v2c/v3, RMON, QoS, 802.1X, IGMP Snooping, ACL, WEB/TELNET/SSH access control, static aggregation, port mirroring, static MAC address binding, network diagnostics, loopback detection, email logs, alarms, SNTP, system logs, and online system upgrades. These features improve network performance, reliability, and security, meeting the requirements of complex networks. The product has undergone rigorous testing for functionality, high and low-temperature performance, safety, and EMC compliance, making it suitable for complex network and demanding industrial environments. It can be widely used in fields such as comprehensive energy, smart cities, rail transportation, intelligent traffic, smart factories, and industrial automation.
Tính năng
- Support MW-Ring v1/v2, ERPS, STP/RSTP, and other ring redundancy protocols to enhance network reliability
- Fast ring redundancy (MW-Ring v1/v2) with a recovery time of less than 20ms, improving the reliability of system communication
- Support single or dual AC85264V/DC110370V power supply optional
- With IP40 high-strength metal enclosure fanless design, the device can reliably operate in harsh industrial environment ranging from -40°C to +75°C
Thông số kỹ thuật
|
Software |
|
Switching |
Support port configuration, port rate limiting, storm suppression, storm detection, port aggregation, LACP (Link Aggregation Control Protocol), and port statistics
Support 802.1Q VLAN and port isolation
Support MAC address aging and static MAC address binding |
|
Redundancy |
Supports MW-Ring v1/v2 private ring network technology
Supports ERPS (Ethernet Ring Protection Switching)
Supports RSTP (Rapid Spanning Tree Protocol) and compatible with STP (Spanning Tree Protocol) |
|
Multicast |
Supports IGMP Snooping
Supports static multicast MAC address binding |
|
Security Management |
Support access control through WEB, TELNET, and SSH
Support ACL (Access Control List), 802.1X port authentication
Support loopback detection, alarms, and email logging |
|
Management and Maintenance |
Supports QoS (Quality of Service), SNMPv1/v2c/v3, SNMPv1/v2c/v3 TRAP, RMON, and LLDP
Supports port mirroring and Ping
Supports user privilege management, system logging, local/network time synchronization, and daylight saving time (DST)
Supports online reboot, factory reset, system upgrade, and configuration file upload/download
Supports MW-NMPv2, MixView, and MaxView |
|
Switch Capability |
|
Processing Type |
Store-and-Forward |
|
Backplane Bandwidth |
12.8Gbps |
|
Buffer Size |
4.1Mbit |
|
MAC Table Size |
8K |
|
Interface |
|
100M Fiber Port |
2*100Base-FX fiber ports (SC/FC/ST, single-mode/multi-mode, wavelength and transmission distances are optional) |
|
100M Copper Port |
24*10/100Base-T(X) auto-sensing RJ45 ports, support full/half duplex and auto MDI/MDI-X |
|
Relay |
1 relay alarm output with 3-pin 5.08mm pitch locking terminal connectors |
|
CONSOLE |
1 Console port with RS232 signal using an RJ45 connector for device debugging |
|
Status LED |
Power indicator, operation indicator, alarm indicator, interface rate, and connection/activity status indicator. |
|
Power Supply |
|
Input Voltage |
Single or dual AC85~264V/DC110~370V power supply optional |
|
Power Consumption |
＜9W@AC220V(full load) |
|
Connection |
5-pin 5.08mm pitch locking terminal connectors |
|
Physical Characteristics |
|
Dimensions |
482.6×44×210 mm (mounting clip included) |
|
Installations |
19inch 1U Rack mount |
|
IP Code |
IP40 |
|
Weight |
2.7kg |
|
Working Environment |
|
Operating Temp |
-40℃~+75℃ |
|
Storage Temp |
-40℃~+85℃ |
|
Relative Humidity |
5%~95% (non-condensing) |
|
Industry Standard |
|
EMC |
IEC 61000-4-2 (ESD - Electrostatic Discharge): Level 4
IEC 61000-4-5 (Surge): Level 4
※ Ethernet port supports 6kV lightning protection
IEC 61000-4-4 (EFT - Electrical Fast Transient): Level 4 |
|
Certification |
CE, FCC, RoHS |
Download
Datasheet
User Manual
Thông tin đặt hàng
|
Standard Model |
100M Fiber Port |
10/100M Copper Port |
Input Voltage |
|
MISCOM6026-2F(M/S)-AD220 |
2 |
24 |
Single AC85~26/DC110~370V power supply
(Dual power supply optional) |
