Card mở rộng 4 kênh AI + 4 kênh DI + 4 kênh Relay ICP DAS XV306 CR

Chia sẻ:
Mã sản phẩm: XV306
Thương hiệu: ICP DAS
Tình trạng: Còn hàng

4-ch AI, 4-ch DI and 4-ch Power Relay Expansion Board

Liên hệ
Mô tả

Card mở rộng 4 kênh AI + 4 kênh DI + 4 kênh Relay ICP DAS XV306 CR

The XV306 is a multifunction expansion board that includes 4 Analog Input channels, 4 Digital Input channels and 4 Form A Relay Output channels. It provides a programmable input range on all Analog Input channels (+/-1 V, +/-2.5 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ +20 mA or +4 ~ +20 mA), and voltage and current outputs are jumper selectable. The Digital Input channels can be used as 32-bit counters. The XV306 also provides options for configuring power-on values for the Digital Output. 4 kV ESD protection and 2000 VDC intra-module isolation are also provided to enhance noise immunity capabilities in industrial environments.

Tính năng

  • Multifunction (4 AI, 4 DI, 4 Relay)
  • Individual Channel Configuration
  • Jumper Selectable Voltage or Current Input/Output
  • Digital Input Channels can be used as 32-bit Counters
  • Open Wire Detection for Current Output
  • Configurable Power-on Value Settings
  • 120 VDC Overvoltage Protection for Analog Input
  • 70 VDC Overvoltage Protection for Digital Input

Thông số kỹ thuật

Isolation
Intra-module Isolation 2000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact For Each Terminal
±8 kV Air For Random Terminal
Analog Input
Channels 4
Type ±1 V, ±2.5 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
Resolution 16-bit
Accuracy Normal Mode: ±0.1 %
Fast Mode: ±0.5 %
Sampling Rate Normal Mode: 10 Hz
Fast Mode: 200 Hz
Input Impedance 20 MΩ
Overvoltage Protection 120 VDC
Individual Channel Configuration Yes
Digital Input/Counter
Channels 4
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +3.5 ~ +50 VDC
OFF Voltage Level +1 VDC Max.
Max. Counts 32-bit (0 ~ 4, 294, 967, 285)
Frequency 50 Hz
Min. Pulse Width 10 ms
Input Impedance 10 KΩ, 0.5 W
Overvoltage Protection 70 VDC
Relay Output
Channels 4
Type Power Relay (Form A)
Contact Material Silver Cadmium Alloy
Contact Rating 6 A @ 35 VDC
6 A @ 240 VAC
Operate Time 5 ms (typical)
Release Time 1 ms (typical)
Electrical Endurance 1 x 10^5 ops.
Mechanical Endurance 30 x 10^6 ops.
Power on Value Yes
COM Ports
Ports 1 x RS-232
Baud Rate 115200 bps
Data Format N, 8, 1
Protocol Modbus/RTU
Power
Consumption 1.6 W Max.
Powered from Terminal Block 5 VDC
Mechanical
Dimensions (mm) 59 mm x 82 mm x 13 mm (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Thông tin đặt hàng

XV306 CR  4-ch AI, 4-ch DI (Wet) and 4-ch Power Relay (6A Rating Current) Expansion Board (RoHS)

Tài liệu

Datasheet

Download Center

Đăng nhập
Đăng ký
Hotline: 0904251826
x